Solaire Energy Systems

Get Adobe Flash Player



Contact Us

Phone :
+91-22-25785158, +91-22-25786263

Call Us :
08043693704


EnglishFrenchHindiSpanish



Visitor No. :

Flat Plate Collector Solar Water Heater (300 LPD)


Flat Plate Collector Solar Water Heater (300 LPD)

We bring forth an exclusive range of Flat Plate Collector Solar Water Heater (300 LPD). We check the Flat Plate Solar Water Heater on stringent quality parameters before approving for delivery. We are offering the Flat Plate Collector Solar Water Heater to buyers all over the world at highly affordable rates.



Specifications

Material & Thickness

Stainless Steel – 304/GRP/Boiler grade steel.

Type

Cylindrical – horizontally assembled.

Size

Ø550, Length 1230.

Insulation

P U F.40-50mm.

Outer Cladding

Pre coated galvanized Steel/Aluminum.

Outer Finishing

Pure Polyester Powder Coating finish.

Outer Finish Color

Golden Yellow & Black combination.

Back up Heater

2 KW With thermostat control 230V AC.

Tank Supports

Fabricated and powder coated M.S. Angle

Tank Testing

Factory pressure tested for normal systems is at 2 Kg/cm².

Normal Working pressure of the system

Less than 1 Kg/cm².

Interconnection Tank and Collector

EPDM Pipe

 

No. of Collectors 03 No.
Type Copper, selectively coated with “NALSUN” Black Chrome coating.
Size 2080mm L x 1050mm W x 100mm H
Absorber Material Copper - Copper absorber.
No. of Fins 9 No’s per collector
Header Tubes Copper, Ø25 mm, 22 SWG.
Riser Tubes Copper, Ø12.5 mm, 24 SWG
Header Protective coating Polyurethane based coating
Riser to Fin Joining Ultra Sonic Metal welding
Collector Box Aluminum
Protective coating on Collector Box Pure Polyester powder coated - Golden Yellow
Glass retaining angle / Aluminum 25mm Pure Polyester Powder coated - Black
Collector back sheet Aluminum Screwed to the frame
Back, Corner Sealing Non Acidic Silicon sealant through corners and screw joint
Top Cover/Glazing Toughened glass, 4mm thick
Glass Beading High quality EPDM Rubber - Single Piece
Absorber Flanges 4 mm Thick Machined brass flanges, 63 mm dia, 4 bolt holes
Gaskets and Grommets High quality EPDM special shaped full Gaskets and Grommets
Insulation Bottom Rock wool, 50 mm 48 kg/m³ density
Insulation Side Rock wool, 25 mm 48 Kg/m³ density
Reflective foil Aluminum 50 microns thick for bottom and 0.45 mm for sides
Collector Supports Fabricated and Duly powder coated Mild Steel Sections

 

Items Price, Action