Solaire Energy Systems

Get Adobe Flash Player



Contact Us

Phone :
+91-22-25785158, +91-22-25786263

Call Us :
08043693704


EnglishFrenchHindiSpanish



Visitor No. :

Flat Plate Collector Solar Water Heater (200 LPD)


Flat Plate Collector Solar Water Heater (200 LPD)

Customers can obtain our range of Flat Plate Collector Solar Water Heater (200 LPD). We fabricate the Solar Water Heater in adherence to norms set by industrial regulatory bodies. We are capable of delivering small or bulk orders of Solar Water Heater to our buyers in domestic and international markets.



Specifications

Material & Thickness

Stainless Steel – 304/GRP/Boiler grade steel.

Type

Cylindrical – horizontally assembled.

Size

Ø360, Length 1800.

Insulation

P U F.40-50mm.

Outer Cladding

Pre coated galvanized Steel/Aluminum.

Outer Finishing

Pure Polyester Powder Coating finish.

Outer Finish Color

Golden Yellow & Black combination.

Back up Heater

2 KW With thermostat control 230V AC.

Tank Supports

Fabricated and powder coated M.S. Tube

Tank Testing

Factory pressure tested for normal systems is at 2 Kg/cm².

Normal Working pressure of the system

Less than 1 Kg/cm².

Interconnection Tank and Collector

EPDM Pipe

 

No. of Collectors

02 No.

Type

Copper, selectively coated with “NALSUN” Black Chrome coating.

Size

2080mm L x 1050mm W x 100mm H

Absorber Material

Copper - Copper absorber.

No. of Fins

9 No’s per collector

Header Tubes

Copper, Ø25 mm, 22 SWG.

Riser Tubes

Copper, Ø12.5 mm, 24 SWG

Header Protective coating

Polyurethane based coating

Riser to Fin Joining

Ultra Sonic Metal welding

Collector Box

Aluminum

Protective coating on Collector Box

Pure Polyester powder coated - Golden Yellow

Glass retaining angle / Aluminum

25mm Pure Polyester Powder coated - Black

Collector back sheet

Aluminum Screwed to the frame

Back, Corner Sealing

Non Acidic Silicon sealant through corners and screw joint

Top Cover/Glazing

Toughened glass, 4mm thick

Glass Beading

High quality EPDM Rubber - Single Piece

Absorber Flanges

4 mm Thick Machined brass flanges, 63 mm dia, 4 bolt holes

Gaskets and Grommets

High quality EPDM special shaped full Gaskets and Grommets

Insulation Bottom

Rock wool, 50 mm 48 kg/m³ density

Insulation Side

Rock wool, 25 mm 48 Kg/m³ density

Reflective foil

Aluminum 50 microns thick for bottom and 0.45 mm for sides

Collector Supports

Fabricated and Duly powder coated Mild Steel Sections

 

Items Price, Action