Solaire Energy Systems

Get Adobe Flash Player



Contact Us

Phone :
+91-22-25785158, +91-22-25786263

Call Us :
08043693704


EnglishFrenchHindiSpanish



Visitor No. :

Flat Plate Collector Solar Water Heater (100 LPD)


Flat Plate Collector Solar Water Heater (100 LPD)

We are offering Flat Plate Collector Solar Water Heater (100 LPD) to our valued customers across the globe. Our Solar Water Heater is noted for features like efficient performance and smooth operation. Customers can rely on us for swiftly delivering Flat Plate Solar Water Heater to any part of the world.



Solar Water Heater 100 LPD Capacity Type FPC

Material & Thickness Stainless Steel – 304/GRP/Boiler grade steel.
Type Cylindrical – horizontally assembled.
Size Ø360, Length 1800.
Insulation P U F.40-50mm.
Outer Cladding Pre coated galvanized Steel/Aluminum.
Outer Finishing Pure Polyester Powder Coating finish.
Outer Finish Color Golden Yellow & Black combination.
Back up Heater 2 KW With thermostat control 230V AC.
Tank Supports Fabricated and powder coated M.S. Tube
Tank Testing Factory pressure tested for normal systems is at 2 Kg/cm².
Normal Working pressure of the system Less than 1 Kg/cm².
Interconnection Tank and Collector EPDM Pipe

 

No. of Collectors 02 No.
Type Copper, selectively coated with “NALSUN” Black Chrome coating.
Size 2080mm L x 1050mm W x 100mm H
Absorber Material Copper - Copper absorber.
No. of Fins 9 No’s per collector
Header Tubes Copper, Ø25 mm, 22 SWG.
Riser Tubes Copper, Ø12.5 mm, 24 SWG
Header Protective coating Polyurethane based coating
Riser to Fin Joining Ultra Sonic Metal welding
Collector Box Aluminum
Protective coating on Collector Box Pure Polyester powder coated - Golden Yellow
Glass retaining angle / Aluminum 25mm Pure Polyester Powder coated - Black
Collector back sheet Aluminum Screwed to the frame
Back, Corner Sealing Non Acidic Silicon sealant through corners and screw joint
Top Cover/Glazing Toughened glass, 4mm thick
Glass Beading High quality EPDM Rubber - Single Piece
Absorber Flanges 4 mm Thick Machined brass flanges, 63 mm dia, 4 bolt holes
Gaskets and Grommets High quality EPDM special shaped full Gaskets and Grommets
Insulation Bottom Rock wool, 50 mm 48 kg/m³ density
Insulation Side Rock wool, 25 mm 48 Kg/m³ density
Reflective foil Aluminum 50 microns thick for bottom and 0.45 mm for sides
Collector Supports Fabricated and Duly powder coated Mild Steel Sections

 

Items Price, Action